Brakes work...

[airjackson]

who advised you not to be gentle on the erj break application? the key is continuous but you don't have to be hard on them either.

Ummm...the training/service bulletin (written by EMBRAER) in the SOP did.

 

[CX880]

Ummm...the training/service bulletin (written by EMBRAER) in the SOP did.

You don't have to send the pax flying forward because the sop says so. The key to that is continuous breaking not hard breaking. Other manufacturers do not recommend continuous breaking.

 

[bjack]

The Q400 also has carbon brakes. We are told the same thing "light applications ruin the brakes, firm application is needed". I thought I was applying firm brakes then had a checkairman tell me to put about twice the pressure on. Way too much in my opinion, but I do press firmer than I use to.

 

[airjackson]

You don't have to send the pax flying forward because the sop says so. The key to that is continuous breaking not hard breaking. Other manufacturers do not recommend continuous breaking.

I swear to god, I feel more stupid every time I visit this site...

 

[SplitBar]

I could care less about "wear and tear" and ATC constraints. I will do what is best for passenger comfort.....that is part of professionalism.

 

[kf4amu]

If airlines were concerned about brake wear from light applications of the brakes, they should install brakes that resist deterioration from light applications of brakes.

I would chalk this up to a "not my problem" issue. I avoid using the brakes anyway because Beta is cool and usually effective, but I won't over-use the brakes just to save the company a little bit of money.

 

[airjackson]

If airlines were concerned about brake wear from light applications of the brakes, they should install brakes that resist deterioration from light applications of brakes.

Do you mean the manufacturers?

Part of being a "professional" is adhering to guidelines, SOPs, and recommendations supplied by both your company and the aircraft manufacturer.

Who's the real retard, the retard? Or the guy that argues with him?

 

[Flyin2low]

Do you guys think that the military guys or the civilian guys know how to brake better?

 

[CX880]

Do you guys think that the military guys or the civilian guys know how to brake better?

Clearly the military guys can brake better because they are evaluated on it. And they have those patches on their jackets which add more credibility.

 

[CX880]

If airlines were concerned about brake wear from light applications of the brakes, they should install brakes that resist deterioration from light applications of brakes.

I would chalk this up to a "not my problem" issue. I avoid using the brakes anyway because Beta is cool and usually effective, but I won't over-use the brakes just to save the company a little bit of money.

Most airplane manufacturers do not want you to use heavy breaking. We are only talking about carbon brakes here.

 

[BoilerUP]

Most airplane manufacturers do not want you to use heavy breaking. We are only talking about carbon brakes here.

Mother of God...I'm no grammar nazi with my KY public school education but for fark's sake, you profess to be a professional pilot:

break = snap. malfunction. not working properly. fail.

brake = stop.

 

[CX880]

break = snap. malfunction. not working properly. fail.
.

It could also mean to stop what you're doing and go out for a time out.

 

[PeanuckleCRJ]

Mother of God...I'm no grammar nazi with my KY public school education but for fark's sake, you profess to be a professional pilot:

break = snap. malfunction. not working properly. fail.

brake = stop.

Are you really that gullible?

 

[BoilerUP]

Are you really that gullible?

No; I knew it was flame.

I had to get my rant out anyway. :nuts:

 

[Abernathy]

I was coming in on a DL 767-4 the other day into ATL. There was no long out flare or anything, and from the look of it, we were easily in the touchdown zone. For whatever reason the brakes were stomped on and we turned off at a high speed. Being 5:30AM-ish, it wasn't a busy time at the airport. In the process of the heavy braking, a galley cart and some other stuff came loose and flew forward and you could here the shattering of stuff breaking. Loud. Startling to some pax. And it wasn't smooth braking. It was rough and jerky.

So I ask, "what's with all the heavy braking at mainline carriers?"

Now, I'm sure there was a reason. Just like there are probably reasons why you experience "so much" heavy braking on your regional flights. Must be all the "unprofessionalism" and the lack of hats at the regional carriers.