Why on earth are we discussing this one again??? And FS, I thought you were smarter than this

You guys are thinking as if the engine produces forward motion via the wheels. The wheels are only there to make it easier for the engine and propeller to pull the airplane on the ground, guys... Well, and for somewhat smoother landings, I guess...
Look at it this way (using a small SE prop for ease of understanding):
You are standing in front of the airplane, holding it by the propeller blades. YES, the engine is off!!! Wheels are on a threadmill, brakes released. And yes, YOU are standing on solid ground.
The threadmill starts up, slowly at first, then faster and faster. Initially, you'll feel a tug, as the wheels start spinning, but you'll find that it's actually not that hard keeping the airplane still as the wheels go faster and faster. Yes, I know, eventually you'll get to the point that you can't hold it any longer, but that is at a much higher wheelspeed than you apparently think.
Now realize how much more pulling power that engine and propeller has. It'll easily overcome the small amount of friction the threadmill is exerting on the wheels. Thus, the airplane will move forward on the threadmill, and it will become airborne at normal indicated airspeed. TIRE speed will be way higher than normal, but assuming the tires will withstand those speeds, the airplane will be airborne LONG before the friction from the threadmill is at the point of countering thrust.