Welcome to Flightinfo.com

  • Register now and join the discussion
  • Friendliest aviation Ccmmunity on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, promote aviation
  • Share the passion for aviation
  • Invite everyone to Flightinfo.com and let's have fun

757 Video

Welcome to Flightinfo.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends
  • Share the passion of aviation
  • Friendliest aviation community on the web
All the manuvers I have seen or done at airshows are the same manuvers we do on a very normal basis. Gun pattern, Tactical formation, weapons patterns, the carrier break.

It's all the same thing we do in resticted areas, at airshows we just do it in front of a crowd. NO BIG DEAL TO US, but can provide a thrill to the public.

The airshow demonstration teams obviously have more practice time and have a set routine, but as far as the normal flyby stuff, we do that at the carrier for the troops all the time. It gets them siked up and makes them feel a little more part of the team. This 757 flyby could have been just that.
 
I wonder if they considered the dynamic loading on the fan sections and pylons as well as the potential for compressor stall as they slice it off in a 90 at the top....just wondering. I've done that sort of thing in the sim a number of times over then years in the 757, 767 and A-310. It's lots of fun, all the kick but none of the potential consequences. We used to roll it up in a 90 degree bank to go between the twin towers and then flatten it out to fly under the Verazanno Bridge. Just flying between points of light in cyberspace.
 
EagleRJ said:
Just eyeballing it, I'd say these guys were doing 400kts as they came down center field. Probably still around 250kts as the camera lost sight of them. I'm sure that's over the Vmo for the 757 at sea level.


ON a -200 with the RB211's, VMO is 350kts, 313kts below 8000 for bird protection.
 

Latest resources

Back
Top Bottom