As for raw data approaches, they are required for all 121 and 135 IFR checkrides. If the aircraft has a flight director, you will do at least 1 raw data approach, no matter what the MEL says. The MEL deals with leaving the gate. I have had FD's fail in flight, so I had no choice but to shoot a raw data approach.
Until the runway length is close to balance field length, V1 is an arbitrary number. Sometimes it is better to abort the takeoff than continue. Which would you rather do? Follow SOP and auger in just off the airport at redline. Or disregard SOP, abort the takeoff above V1 and go off the end of the runway at low speed?
Each situation is different and just because you did it that way the flight before, doesn't mean that you should do it that way on the next flight. That is why aircraft have pilots, not computers, making the decisions.
Until the runway length is close to balance field length, V1 is an arbitrary number. Sometimes it is better to abort the takeoff than continue. Which would you rather do? Follow SOP and auger in just off the airport at redline. Or disregard SOP, abort the takeoff above V1 and go off the end of the runway at low speed?
Each situation is different and just because you did it that way the flight before, doesn't mean that you should do it that way on the next flight. That is why aircraft have pilots, not computers, making the decisions.