FN FAL
Freight Dawgs Rule
- Joined
- Dec 17, 2003
- Posts
- 8,573
Yes, I set it for non-precisions. You do get more alarms than you'd like, but it is the only terrain avoidance warning I have. Worst case scenario is that it goes off and makes you look at your altimeters.firstthird said:FN FAL,
not sure I'm reading your post correctly. You're using Radalt for setting mins for non-precisions? I just know how we do it in the reserves and at my airline, and we set MDAs in the Baro for most stuff. At my airline, the only time we set the MDA in the radalt is CAT II ILS and below.
It seems that setting a non-prec min in the radalt is not ideal, since it is a height above airport, versus a precision height above TDZE. Especially since you'll get weird indications like the trees and ridges and whatnot. Seems that setting MDA in Baro, and scanning the Radalt for SA would be a better choice.
thoughts?
I think if you read the original poster's posts, he makes mention of radar altimeters. I don't think GPWS would do any better...I hear of guys saying they go off all the time during approaches.
It's a tool...it's not what I use to actually fly the MDA. In single pilot IFR flying, you sure don't want to set up a 1,000/1,500 FPM descent after the FAF and forget to level off at MDA. The radar alt is just used as a safety catch...it's a tool and I use all the tools. One tool we don't have have is GPWS, nor do we have altitude preselect on our autopilots. We do have an altitude alarm on our KLN-89B GPS, which I also use most of the time, but you have to round up the altitudes to the nearest 100 feet, because you can't enter a number like 376 in it. You'd have to enter 400.
Our company manual states that we are to set the thing to the highest setting for departure and cruise...just in case you wind up snoozing or losing positional awareness. It could just save your bacon if you need it. If you leave it at 200 feet after the last ILS, you would only have 200 feet of warning if there was an 'anomaly' during the flight.