I thought we covered that - that the Birmingham approach would not require that rate of descent, but that there is nothing "magic" about the number 1000.
As you note, there are a handful of approaches that require a higher rate.
I gave an example of an approach that would require slightly higher than 1000 fpm.
I worked for one 121 carrier whose SOP was VS-1000 max, VS-1200 max if briefed. There were a few non-precision approaches with very short final segments where 1000 was just not going to get you in at minimums.
Bottom line is that even limiting to VS-1000 can kill you in some situations, depending on situational awareness. I've seen it in the sim more than once.
Numerical values on the instrument panel are only part of what makes an approach truly stabilized. The real stabilization takes place in the awareness of the crew. If the crew is behind the airplane, even being on speed and on path might not be enough.
Years of sim instructing will teach you an awful lot about how crews react to various non-precision approaches.
One caveat I will add about descent rates - they need to be planned well prior to starting the approach. I would not advocate VS>1000 without having a legitimate reason, and planning in advance.
Exceeding the planned rate reactively during an approach is a very bad idea.