Welcome to Flightinfo.com

  • Register now and join the discussion
  • Friendliest aviation Ccmmunity on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, promote aviation
  • Share the passion for aviation
  • Invite everyone to Flightinfo.com and let's have fun

Limitations on the Use of Automation at Your Company

Welcome to Flightinfo.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends
  • Share the passion of aviation
  • Friendliest aviation community on the web

CutEmUp

Well-known member
Joined
Oct 31, 2005
Posts
140
In light of the discussion in another thread about pilots rejecting an aircraft due to automation being MELd.

What are the limitations on the Use of Automation at your company?

Piedmont

-Flight Director must be used for the takeoff segment (up to 1500ft AGL)

-Autopilot cannot be engaged below 1500ft AGL on takeoff

-Autopilot must be disconnected below 200ft AGL on approach

-Flight Director altitude capture must always be armed when changing altitudes. (the pitch command bar will appear when you need to level off. Once level, it can be cleared)
 
Last edited:
Use the highest level of automation available, except as to maintain proficiency.
 
Last edited:
I would reply to this, but I'm doing an ILS right now and I am required to monitor the other pilot.

I will get back to you after we land.

Thanks for your patience.
 

Latest resources

Back
Top