Avionics Work on my NXCub

[lrobichaux]

Tonight's flight I tried having both COM 1 and 2 enabled with MIC 1 active. I definitely get feedback, albeit slight, when transmitting. When I turn off COM 2 it's crystal clear.

Let me know how your change works. Also, are you doing this wiring yourself or having an avionics tech do it?

I had an avionics shop do it. Did you try the same test with MIC2 active with both COM1 and COM2 enabled? I'm going to do a proper test this weekend and load up the video results here.

 

[Neal]

Did you try the same test with MIC2 active with both COM1 and COM2 enabled?

No, it was just a quick test of "do I have the issue" and then just went on my way from there I may reach out to Pete to get my name on the list and also verify my install is subject to the same issue and will keep this thread updated should I do anything. I'm getting ready to head out in my motorhome for a bit so it may not be until later when I'm ready to screw something up again