MrSuupaFly
...
- Joined
- Jun 28, 2006
- Posts
- 16
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Which one is better? In response to the AA thread I wondered what the pilots of this great board opinion was on a direct comparison between both aircraft.
Not only as far as jumpseat comfort,passenger comfort but also,but more importantly which is a better plane to fly from a pilots perspective.
I vote for the 757. It besides the 727 is my favorite plane.
One big factor is the wing sweep. The 757 is 25 degrees and the A320 is 35 degrees. The A320 will cruise faster, the 757 will cruise more economically. It also improves the climb perfromance with the less swept wing.
Ultrarunner said:The thrust ratings on those engines varied between 22,000 lbs and 27,000 lbs of thrust per engine.
The bus has a higher sweep, resulting in a higher critical mach and it's got a lower MMO which is interesting.
One of the reasons to increase the sweep is to increase the critical mach, which then in turn increases normal opeating mach resulting in higher cruise speeds.
What's mmo on the boeing, .84 or so? And .82 on the bus? I'd imagine it's going to take a fair amount of fuel to push that straighter wing to higher mach numbers, not to mention the overall weight. So it's not hard to understand why the bus wins out on cost of operation especially if you've configured it for higher density seating.
Interesting discussion.
The bus has a higher sweep, resulting in a higher critical mach and it's got a lower MMO which is interesting.
One of the reasons to increase the sweep is to increase the critical mach, which then in turn increases normal opeating mach resulting in higher cruise speeds.
What's mmo on the boeing, .84 or so? And .82 on the bus? I'd imagine it's going to take a fair amount of fuel to push that straighter wing to higher mach numbers, not to mention the overall weight. So it's not hard to understand why the bus wins out on cost of operation especially if you've configured it for higher density seating.
Interesting discussion.
Yes, 36,000 lbs to 43,000 lbs of thrust PER MOTOR. On the -200 there are two pratt variants and two rolls variants.
The two pratts are 36.6 and 40.1
The two Rolls are 40.2 and 43.5
Those thrust ratings are PER MOTOR. And, as you know, the 75 has two motors.
You should be up to speed now in checking my calculations.![]()