Welcome to Flightinfo.com

  • Register now and join the discussion
  • Friendliest aviation Ccmmunity on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, promote aviation
  • Share the passion for aviation
  • Invite everyone to Flightinfo.com and let's have fun

What is RNP-5 and RNP-10?

  • Thread starter Thread starter lumax
  • Start date Start date
  • Watchers Watchers 13

Welcome to Flightinfo.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends
  • Share the passion of aviation
  • Friendliest aviation community on the web
You are still required to do a celcal check when changing controlling agencies, even if you are CPDLC and ADS, eg. Tokyo to SFO, etc.
 
I've flown RNP approaches but I am not familiar with these terms. From what I could find on the web, RNP-5 and RNP-10 are used for en-route separation on oceanic routes.
Can anyone shed more light on this?
Do you have a good source for more info?

Thanks

Kind of scary you are flying approaches that you do not understand or are qualified for. I suggest you do your homework and get some required training so you will actually understand what is required for all RNP flying.
 
Thanks for the smart ass response there floatplane. I know that RNP approaches are usually .15, .2, or .3. I know how RNP approaches work and the requirements. If you knew how to read you'd see that I am asking about RNP-5 and RNP-10. As others have kindly responded and explained, these are used for enroute operations in non-radar environments (oceanic), nothing to do with approaches.
Now that you have put me on my place, I hope to someday grow up and be just like you.
It is stupid comments like yours that have turned an informational forum into nothing more than childish bickering.
 
I think that the SAAAR approches require an RNP of .11 or greater, Oceanic Airspace requires RNP 4 or higher, In the U.S we use RNP 2 or higher, Europe enroute RNP 5 (B-RNAV) and some SIDS and Stars require RNP 1. Other Managed approaches require RNP .3. Man I wish all those controlling agencies would just get toguether and settle on 1 set of numbers. lol. uba757
 
Thanks for the smart ass response there floatplane. I know that RNP approaches are usually .15, .2, or .3. I know how RNP approaches work and the requirements. If you knew how to read you'd see that I am asking about RNP-5 and RNP-10. As others have kindly responded and explained, these are used for enroute operations in non-radar environments (oceanic), nothing to do with approaches.
Now that you have put me on my place, I hope to someday grow up and be just like you.
It is stupid comments like yours that have turned an informational forum into nothing more than childish bickering.

Here you go Lumax. Just a place to start, you might also reference your company FOM if you are conducting these en-route operations they should be covered there as well. I would also suggest contacting your training department. Have a nice day!

http://www.boeing.com/commercial/caft/reference/documents/RNP082400S.pdf

http://www.faa.gov/air_traffic/publications/ATpubs/AIM/Chap1/aim0102.html

http://www.faa.gov/regulations_poli....cfm/go/document.information/documentID/23143

http://www.faa.gov/about/office_org...essionid=04306748fce9c11ac32e57591e5a2e3c6c43

http://www.aviationmanuals.com/index.php?page=article_rnp
 
Last edited:

Latest resources

Back
Top Bottom