CAT ll
hellas said:
hey, we are looking to get our plane and pilots CAT 2 qualified, we have a DA-20 with a pro-line 21, the Q's are:
What does it take to get the avionics up to the task?
What does it take to get the pilots qualified and how often is requal.?
I really would appreciate your knowledge in this area...Thank You
Goooooo Steelers!!
I would imagine that the avionics are satisfactory as you see them.
You will need to create or buy a CATll manual that describes your CATll training program, avionics maintenance program, your specific airplane avionics configuration, and your methods of compliance. There is a Advisory Circular out regarding CATll operations for general aviation aircraft. You will need formal sim training by your training vendor using your FAA approved CATll manual for guidence and compliance. Usually takes a few hours of classroom instruction along with at least one four hour sim session.
You can get assistance in creating the manual from several vendors. Assessment Compliance Group is just one of those that you might use for this manual creation process which is the hardest and most time consuming part of the whole package. With the exception of Gulfstream, I don't believe any of the other mfg's have an off the shelf CATll manual. All others need to create their own from scratch and submit it to their local FSDO for approval. I'm sure someone will correct me if there are other mfg's that have this manual for their respective aircraft. Don't be suprised if your local FSDO is not conversent on this subject, especially if most of their oversight is with GA aircraft. Interesting note; Even Boeing which is CATlllA/B out of the box, does not have an off the shelf CATll/lll manual. Each operator (airline) needs to create their own for FAA approval.
Typical things that you will need to decide are;
Is it going to be a monitored approach?
Verbal callouts.
Coupled or hand flown.
I assume no autoland capability in that airplane so that is not an issue.
Engine out CATll capability?
MEL applications that effect your CATll capability.
CATll recurrent is done once a year along with your normal recurrent. Only takes a couple of additional approaches depending on how your manual has been set up and approved.
When you finally get approval, the FAA will restrict you to a higher min for a predetermined length of time, or number approaches conducted which ever comes first. Typically it would look like RVR1800 and a DA of 150' in lieu of RVR1200 and 100' DA.
Don't know if FedEx did CATll in their Falcons way back when, but there may be some good source material from that era even though your avionics are significantly enhanced.
Hope that helps more than it hurts!