Waldom
Fifteen blades!
- Joined
- Oct 16, 2005
- Posts
- 278
- Type aircraft owned
- Piper PA-11
- Base airport
- NY95
- Ratings
- ATP FE A&P
What's the difference in GIV and GIII fuel burn numbers and anybody got any answers on the AC vs DC deal?
The G-III fuel burn numbers you were given are about right. Hourly burns for the G-IV are 3700, 2900, 2900, 2800, 2800, 2700, 2700, 2600, 2600, 2500.
I suspect the "AC" G-IIIs have a higher re-sale value than the "DC IIIs" (be careful, the uninitiated might think you're talking about a real airplane-as in Douglas- when you refer to them that way). All other things being equal, of course.
The "DC" G-III electrical system has more redundancy than the "AC" system. You just have to pay a little closer attention in initial ground school for a "DC" G-III because it is a more complicated and less automated electrical system. If you have a problem with either system, though, just follow the QRH and you will be fine.
You will like the airplane. The handling is less than sprightly but it is an honest, strait-forward aiplane that is built like a tank and has adequate power. [One thing that sets Gulfstream apart from other O.E.M.s is the fact that the last serial number of a model they deliver has engines with exactly the same amount of thrust that serial number one had.] Besides, any airplane that makes that much noise and produces all that black smoke on departure must be good.
Last edited: