- Joined
- Oct 31, 1996
- Posts
- 1,809
- Type aircraft owned
- Carbon Cub FX-3
- Base airport
- KFCI
- Ratings
- COMM, IFR, MEL, SEL
Change History
Changes made from version 9.52 to 10.00:
- Added support for GCO 14 carbon monoxide detector
- Added support for GDL 90 RS-232 traffic data
- Added heading bug auto sync mode
- Added shortcut to set baro minimums by touching bottom half of altitude tape
- Added configuration option to invert PFD lateral deviation when in reverse sensing region
- Added configuration option to confirm calculated fuel quantity before every flight
- Added additional configuration options for Vertical Power volts/amps gauges
- Added support for custom calibration of magneto P-lead and electronic ignition RPM inputs
- Added support for configuring GTX 45R/345R RS-232 ports for Traffic Format 4
- Added support for Kavlico P500-75A fuel pressure sensor
- Added support for ULPower FADEC manifold temperature
- Added ability to adjust fuel flow calibration offset for FADEC engines
- Added audio alerts for autopilot airspeed limiting
- Improved weather data processing
- Improved NEXRAD display on map page
- Improved handling of 8.33 kHz COM frequencies on GTR 205 / GNC 215
- Improved engine page and EIS display
- Improved discrete input operation on GEA 24 #2
- Improved configuration of thermistor CHT gauge markings
- Improved rotorcraft RPM display
- Improved checklist file processing
- Improved traffic data source selection when both TIS-A and ADS-B are supported
- Improved status display for GTX ADS-B traffic data when TAS/TCAS correlation is supported
- Improved automatic flight plan sync via Connext interface
- Improved handling of external flight plans with parallel track offset
- Improved AFCS operation
- Improved CWS operation
- Improved PFD visual contrast
- Improved data logging
- Changed Vne audio alert
- Changed map orientation override to be preserved when moving between pages
- Changed location of startup database info page to be configurable
- Changed VFR/IFR charts page to show track vector if enabled
- Changed GTX 3x5 configuration to support standby flight displays connected via HSDB
- Changed maximum fuel flow calibration offset to +/- 15%
- General improvements to system operation
- Includes update to G5 SYS 8.80
- Includes update to GAD 27 SYS 2.90
- Includes update to GDU 4xx audio database 3.00
- Includes update to GDU 4xx timezone database 42.00
- Includes update to GDL 5x 2.32
- Includes update to GEA 24/B SYS 4.40
- Includes update to GHA 15 SYS 2.15
- Includes update to GMA 245 SYS 3.30
- Includes update to GMC 507 SYS 3.30
- Includes update to GPS 20A SYS 2.60
- Includes update to GSA 28 SYS 5.90
- Includes update to GSU 25 SYS 4.60
- Includes update to GTR 200 SYS 3.70
- Includes update to GTR 2x5XR SYS 2.32
- Includes update to GTR 2x5R TSO SYS 2.32
- Includes G5 BB 2.40
- Includes GAD 13 BB 2.00
- Includes GAD 13 SYS 2.10
- Includes GAD 27 (-00) BB 2.30
- Includes GAD 27 (-10) BB 2.00
- Includes GAD 29/B BB 3.10
- Includes GAD 29/B SYS 3.40
- Includes GAD 29C/D BB 2.00
- Includes GAD 29C/D SYS 2.10
- Includes GDL 39 4.91
- Includes GEA 24 BB 2.20
- Includes GEA 24B BB 2.00
- Includes GHA 15 BB 2.00
- Includes GI 260 BB 2.20
- Includes GI 260 SYS 3.00
- Includes GMA 245 BB 2.40
- Includes GMA 245 BT 2.00
- Includes GMC 507 BB 2.30
- Includes GMU 11 BB 2.10
- Includes GMU 11 SYS 2.20
- Includes GPS 20A BB 2.10
- Includes GSA 28 (-00) BB 2.20
- Includes GSA 28 (-20) BB 2.10
- Includes GSU 25/B BB 2.30
- Includes GSU 25C/D BB 2.10
- Includes GSU 73 FPGA 2.02
- Includes GSU 73 SYS 3.80