Welcome to Flightinfo.com

  • Register now and join the discussion
  • Friendliest aviation Ccmmunity on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, promote aviation
  • Share the passion for aviation
  • Invite everyone to Flightinfo.com and let's have fun

Embraer 145 systems question

  • Thread starter Thread starter johndt
  • Start date Start date
  • Watchers Watchers 6

Welcome to Flightinfo.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends
  • Share the passion of aviation
  • Friendliest aviation community on the web
So the ITT and the fuel flow are slightly elevated in the affected engine but not drastically so. I don't think it's a faulty sensor b/c it modulates normally with thrust changes and if it was reading incorrectly I would think that it would show an overtemp during icing encounters which it doesn't.

A stuck 14th stage valve sounds likely. That would mean that the engine probably isn't achieving its rated thrust during landing and potential go-around, yes?

I was also thinking it could be either a pre-cooler problem which is no big deal until it fails and you're single bleed in icing conditions. Or it could be a small leak near the sensor?
 

Latest resources

Back
Top Bottom