lakefrontpilot
Love to Fly!
- Joined
- Jul 31, 2004
- Posts
- 23
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Complete with a five-star rating.mmmdonut said:That was an airliners.net post if I have ever seen one...
Thats what I mean...there's got to be another 2,000' at the approach end of 24R...why is it closed? does anyone know?as739x said:I find it hard to believe they expect to be able to do Asian Ops with a 9,000 foot runway....I watch the 777 headed to Asia from San Francisco daily and I see more then a few rotating around the 8,000-9,000 mark. Thats at sea level with 70-75 degrees...
They don't want to have to deal with the 24 runways crossing 28. if they do that, they can only land on both directions in VFR conditions...minitour said:Thats what I mean...there's got to be another 2,000' at the approach end of 24R...why is it closed? does anyone know?
-mini
oh great...I move to Oklahoma and Cleveland gets VFR weather...lakefrontpilot said:They don't want to have to deal with the 24 runways crossing 28. if they do that, they can only land on both directions in VFR conditions...
-J
rogerMJG said:Having been based at CLE for the last 6 plus years here's my take.
First off all the construction is badly needed. CLE is one of the worst airports in the country when it comes to handling capacity. Don't know if it's the amount of pavement, the controllers, the local airspace, the overhead airspace or just the lousy weather for half the year. For example, recently we were given a 15 minute delay to accomodate a wheels up time going from BUF-CLE. What's the big deal you say?? It was 0700 on a Sunday morning with severe clear between us and the airport. When we got on with the Chardon sector controller there was a whopping total of one other airplane one the frequency headed for Hopkins over the CXR arrival gate like us. That other aircraft was a friend of mine who had also been given a delay for a wheels up time coming out of BDL. WTF Over??
So maybe one of CLE's problems is rooted in the ATC system. Who knows. Newark has almost the same runway setup in the world's busiest airspace and they seem to handle it much better. CLE runs this jacked up system where there is a different tower freq for the right and left runway. So depending on which runway you get assigned you may talk to one or two or three different controllers before you either takeoff or land. Problem with this setup is that you can't hear what's going on with the other runway via the radio. You may be starting your takeoff roll and see a plane pulling up to an intersection of your runway ahead of you. Now since you can't hear that aircrafts radio transmissions (since he's on a different freq) you really hope to hell that he stops and holds short of your runway. Kinda scary if you ask me. CLE is also handicapped by its geographic location. It's located under some of the busiest jet routes in the country. Lots of transcon traffic and O'Hare traffic already overhead when you want to join the stream.
One of their biggest problems is lack of space to expand the airport. To run simultaneous ILS approaches I believe you need at least 2500 ft. between runways. To handle the current capacity that CLE has at certain times of the day they really need this ability. They'll never get it with the current location, not unless a whole bunch of houses are demolished and people uprooted and another new runway built on the South end of the airport. I will say this, it's not as bad as it was just a couple of years ago but it should be way better in terms of flow control into the airport.
I'm not sure where the nearly bankrupt city of Cleveland is getting the $ for all of this construction but having first built the new 24R and now completed it's expansion they're working on the taxiway tie inns between the three current runways. That's what all the equipment is doing out there now.
As far as chomping off the east end of 24R, I have no idea. Maybe it was to get the ILS minimums down to 1800 RVR or 200 DH. I think it was a 250DH and 4000 RVR before. I'd have to look at the approach plate.
Asia Ops: Never happen. CAL can barely keep the London flight going as it is. That's only a 757 and it's only been a seasonal flight the last couple of years. They wouldn't even have that flight if it weren't for Goodyear's corporate account and need to shuttle their employees back and forth to London.
CLE has lots of issues. It's one of the more embarassing airports as far as the terminal goes. Even Detroit managed to build a modern, up to date new terminal.
I could go on and on unfortunately but what's the point. It's a near bankrupt city, with a land-locked airport, with some of the highest landing fees, some of the worst ATC issues, one of the worst airport terminals and it's located right in a lake effect snow belt, what more needs to be said. Ahh CLE......
Don't even get me started on the employee shuttle......
Ditto. Best decision I made was leaving CLE for EWR.MJG said:Having been based at CLE for the last 6 plus years here's my take.
First off all the construction is badly needed. CLE is one of the worst airports in the country when it comes to handling capacity. Don't know if it's the amount of pavement, the controllers, the local airspace, the overhead airspace or just the lousy weather for half the year. For example, recently we were given a 15 minute delay to accomodate a wheels up time going from BUF-CLE. What's the big deal you say?? It was 0700 on a Sunday morning with severe clear between us and the airport. When we got on with the Chardon sector controller there was a whopping total of one other airplane one the frequency headed for Hopkins over the CXR arrival gate like us. That other aircraft was a friend of mine who had also been given a delay for a wheels up time coming out of BDL. WTF Over??
So maybe one of CLE's problems is rooted in the ATC system. Who knows. Newark has almost the same runway setup in the world's busiest airspace and they seem to handle it much better. CLE runs this jacked up system where there is a different tower freq for the right and left runway. So depending on which runway you get assigned you may talk to one or two or three different controllers before you either takeoff or land. Problem with this setup is that you can't hear what's going on with the other runway via the radio. You may be starting your takeoff roll and see a plane pulling up to an intersection of your runway ahead of you. Now since you can't hear that aircrafts radio transmissions (since he's on a different freq) you really hope to hell that he stops and holds short of your runway. Kinda scary if you ask me. CLE is also handicapped by its geographic location. It's located under some of the busiest jet routes in the country. Lots of transcon traffic and O'Hare traffic already overhead when you want to join the stream.
One of their biggest problems is lack of space to expand the airport. To run simultaneous ILS approaches I believe you need at least 2500 ft. between runways. To handle the current capacity that CLE has at certain times of the day they really need this ability. They'll never get it with the current location, not unless a whole bunch of houses are demolished and people uprooted and another new runway built on the South end of the airport. I will say this, it's not as bad as it was just a couple of years ago but it should be way better in terms of flow control into the airport.
I'm not sure where the nearly bankrupt city of Cleveland is getting the $ for all of this construction but having first built the new 24R and now completed it's expansion they're working on the taxiway tie inns between the three current runways. That's what all the equipment is doing out there now.
As far as chomping off the east end of 24R, I have no idea. Maybe it was to get the ILS minimums down to 1800 RVR or 200 DH. I think it was a 250DH and 4000 RVR before. I'd have to look at the approach plate.
Asia Ops: Never happen. CAL can barely keep the London flight going as it is. That's only a 757 and it's only been a seasonal flight the last couple of years. They wouldn't even have that flight if it weren't for Goodyear's corporate account and need to shuttle their employees back and forth to London.
CLE has lots of issues. It's one of the more embarassing airports as far as the terminal goes. Even Detroit managed to build a modern, up to date new terminal.
I could go on and on unfortunately but what's the point. It's a near bankrupt city, with a land-locked airport, with some of the highest landing fees, some of the worst ATC issues, one of the worst airport terminals and it's located right in a lake effect snow belt, what more needs to be said. Ahh CLE......
Don't even get me started on the employee shuttle bus......
im headin to the bar right now!!!deskjobssuck said:...
And I love the shuttle bus. Especially the old guy on the weekends who blasts preachers that tell us all that alcohol causes orgies on the streets....
I know this was posted a while ago, but I just came across it. Anyway, I was flying that day and heard this exchange between SWA and CLE ATC. True story and quite funny.I heard a good one last week from a co-worker of mine. Southwest checks on with CLE approach and is given the obligatory 25 miles-from-the-airport 170 knot speed reduction for 24R.
"Unable" says the SW Captain.
When the approach controller asks why, he replies with something along the lines of:
"We try to run an on-time airline, and everytime I come up here you guys issue some ridiculous speed reductions, and it makes us late. Unable."
The uncertain controller then asks what he can do.
"We'll give you 210 knots" replies Southwest.
"O.K., Southwest_____, maintain 210 knots."
HAHAHAHAHAHA. If I ever tried something like that, they'd give me a phone number, and make me "reduce to final approach speed". I thought it was awesome.
Not sure about the hold lines but...Best on a Camel said:All I know is ATC sucks in CLE. Have they figured out how to use their hold short lines yet?