Welcome to Flightinfo.com

  • Register now and join the discussion
  • Friendliest aviation Ccmmunity on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, promote aviation
  • Share the passion for aviation
  • Invite everyone to Flightinfo.com and let's have fun

AA MD80 engine failure at LGA yesterday on takeoff

  • Thread starter Thread starter aa73
  • Start date Start date
  • Watchers Watchers 14

Welcome to Flightinfo.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends
  • Share the passion of aviation
  • Friendliest aviation community on the web
Multiple checklists to run

I am wondering if the uncontained engine failure also took out the associated hydraulic system.

I was given exactly that situation on a MD-88 simulator LOFT (engine failure, one hyd system out, and unsafe gear light). The instructor said it had actually happened to a Scandanavian maddog, and they got a punctured wing tank to boot.
 
I watched him cross over Great Neck Estates with the gear down at 700' and it didn't look like he was going to make it. Go to Passur.com and enter the tracking for 1641 local at LGA and you can watch by clicking on the departure off of 4, that's 2391.

Passur.com wasn't very user-friendly. It took me a little navigating, but next to last on the page: http://www.passur.com/airportmonitor-locations.htm

is LGA. Click and then you can enter august, 4th, 1641.

You can see them depart and turn right over Great Neck.

I think you meant to say flight 2393, not 2391. Flightaware doesn't show AAL2393 on August 4th as diverted to JFK from ATL, but the flight track appears to go to JFK - hard to see but just say to yourself:

enhance....

enhance....

enhance...

enhance...
 
I'm sure the executive management team will get another bonus for a job well done. The pilots? Not so much.
 
What associated hydraulic system? I'm too lazy to dig in my manuals, but as I recall the -80 has only rudder boost and an elevator pusher for hydraulics - flight controls. And I believe both of those are off of accumulators. Cable driven control tabs. It's one of 'the original fly by wire planes': 1/8 inch steel cable.

GOOD JOB Gents!!

I think he's talking about gear being down.

PIPE
 
Yes, the gear was down and that was a real problem for him judging by what I saw. I don't know about the MD80 but I was wondering if landing gear hydraulics could be affected by that uncontained failure.

I am glad it all worked out OK.
 
fantastic job guys

we are all right in analogizing this to our pay.

we do things everyday that would make most people pi$$ their pants, much less this.
 
Last edited:

Latest resources

Back
Top Bottom