Welcome to Flightinfo.com

  • Register now and join the discussion
  • Friendliest aviation Ccmmunity on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, promote aviation
  • Share the passion for aviation
  • Invite everyone to Flightinfo.com and let's have fun

1900 single-pilot?

Welcome to Flightinfo.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends
  • Share the passion of aviation
  • Friendliest aviation community on the web

340drvr

Well-known member
Joined
Feb 10, 2003
Posts
454
I know this has been discussed, but my search didn't turn up any threads.
How do these freight companies operate Beech 1900's single-pilot? Is it a special checkride with waiver, kind of like the citation 550SP, or what? Thanks for any info.
 
Be1900

GUys,

The BE1900 is a "Normal" category airplane ... says so right on the type certificate and every one's airworthiness certificate. The type certificate and the AFM state the minimum crew is "One Pilot".

FAR 135 requires two pilots for all operations that carry 10 or more passengers, FAR 121 requires two pilots.

Most freighters have two pilots seats and one jump seat, hence one pilot and two passengers max.

If you trained and checked at an air carrier that uses (and is required to use) two crew, then your certificate will state "second-in-command required". If you train and check at an operator that doesn't require a second-in-command your certificate will not carry that limitation.

The BE1900 is authorized takeoff weights in excess of 12,500 pounds via the magic of SFAR 41. Otherwise it's just a normal category light twin.

TransMach
 
No special checkride, no waiver, no two different types, just a normal appendix A checkride.
A perhaps better way to say it is that because the Beech 1900 is certified less stringent 41C (commuter rules) rather than FAR 25, it does not require a second in command even though it is over 12500 lb.
If the training is such that the person uses a copilot on the checkride, they will have a "Second in Command Required" restriction under Limitations on their certificate.
In the past, one received both a BE 300 & a BE 1900 type rating when taking the checkride single pilot. (FlightProfit International probably got that one eliminated...$$)
 
Yes it's just a checkride. I think all SYX's check airman are single pilot qualified in the 1900.

JobEEr
 
TransMach explained it the best.

TransMach explained it the best.
When I got my 1900 type I had a person sitting in the right seat reading checklists, radio work and general co-pilot stuff. When my new certificate was typed up it stated "Second in Command required" IF that person had not been in the seat reading checklists and helping it would have not had that "SIC required" on it. Upon my next visit for recurrent I asked for another check ride without a SIC and the "SIC required" was removed"
 
Cowboypilot said:
TransMach explained it the best.
When I got my 1900 type I had a person sitting in the right seat reading checklists, radio work and general co-pilot stuff. When my new certificate was typed up it stated "Second in Command required" IF that person had not been in the seat reading checklists and helping it would have not had that "SIC required" on it. Upon my next visit for recurrent I asked for another check ride without a SIC and the "SIC required" was removed"

So the ride itself was no different other than now you had to flip the flaps and grab the gear?

-mini
 
TransMach said:
GUys,

The BE1900 is a "Normal" category airplane ... says so right on the type certificate and every one's airworthiness certificate. The type certificate and the AFM state the minimum crew is "One Pilot".

FAR 135 requires two pilots for all operations that carry 10 or more passengers, FAR 121 requires two pilots.

Most freighters have two pilots seats and one jump seat, hence one pilot and two passengers max.

TransMach

Not quite all 1900's. The 1900D's are Commuter Category. The A,B and C models are Normal via SFAR 41C (I got my type in the 1900A, two airstairs, no cargo door) Either way the difference is in the way the type rating conducted.

For a single pilot type some portion of the check (usually a V1 cut, followed by a SE ILS to minimums) is supposed to be conducted completely single pilot, the rest of the ride would be done 2 crew if that is appropriate for the operation.

9 passenger seats is the limit for single pilot operations and beech supplies a faa approved seat blocking kit (a sign that says "Do Not Occupy" and goes around the seat belt)

If you have a SIC required type rating, the SIC can be removed via a short checkride from the FAA, DE.
 
FarginDooshbahg said:
Exactly. A Metro is way more airplane than a 1900 ever thought about being, and there are numerous companies that operate THAT single pilot.

What makes the Metro more of a handfull? Systems? Small wing? Bad single engine perf?
 
Flyin Tony said:
That looks like alot of plane for one guy
1900 single pilot? no big deal, have over 1500hrs single pilot experience.
I also fly the Metro single pilot-now that is a pig!
 
KeroseneSnorter said:
Nah, Just a long King Air thats all.

Okay, what's to keep someone from getting a single-pilot type in an Airbus 300? Or a 777? Is there anything the person in the left seat can't reach and REQUIRES a second pilot?
 
I.P. Freley said:
Is there anything the person in the left seat can't reach and REQUIRES a second pilot?

Yes there is.

Also the feds normally use a prereq. for SP ops of being able to see both wing tips from the left seat during taxi. This disqualifies most swept wing aircraft.

Cessna tech told me that the XL was originally designed with SP ops in mind but the lack of visibility shot it down. I think one of Simuflites sims is one of the first built and has the gear handle on the left side. something that no XL was ever produced with.

As far as the bigger stuff, even with two pilots, some of the overhead switches are a stretch to get to. I am 6'2 and there is no way to reach them and fly at the same time. And as far as reaching all the breakers, unless you can fly and get up and go over to the breaker panels at the same time I would call that needing two pilots.
 
KeroseneSnorter said:
unless you can fly and get up and go over to the breaker panels at the same time I would call that needing two pilots.

I thought that's what the autopilot was for....
 

Latest resources

Back
Top