Welcome to Flightinfo.com

  • Register now and join the discussion
  • Friendliest aviation Ccmmunity on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, promote aviation
  • Share the passion for aviation
  • Invite everyone to Flightinfo.com and let's have fun

ICAO Approach Clearance

Welcome to Flightinfo.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends
  • Share the passion of aviation
  • Friendliest aviation community on the web
Why wouldn't you just ask the controller if you were unclear? Seems to me to be the safest option given you weren't sure whether you were correct or the F/O was.
 
Why wouldn't you just ask the controller if you were unclear? Seems to me to be the safest option given you weren't sure whether you were correct or the F/O was.

We had a safe solution to the question. Asking the controller if we could descend to 3000' would not have answered the initial question of whether her approach clearance implied a further descent.

Getting into a conversation about the finer points of an approach clearance with a foreign controller while preparing for a full procedure would probably not be the safest option.

Does that answer your question?
 
They don't have to state that in the states. In radar environments it seems they often state that, but non-radar it is hit or miss. If you were on an airway with a published MEA or MOCA, you can descend to that altitude (whichever is applicable) before reaching the IAF. If you were on a direct routing, then I would stay at 6000.

They do have to issue the altitude unless you are on a published "routing" which shows an MEA, etc. It is the result of the TWA accident in Virginia many years ago. ATP 7110.65, section 4-8-1 (b) (2).
 

Latest resources

Back
Top