Welcome to Flightinfo.com

  • Register now and join the discussion
  • Friendliest aviation Ccmmunity on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, promote aviation
  • Share the passion for aviation
  • Invite everyone to Flightinfo.com and let's have fun

FYI NO-GO: Garmin G3X Touch (experimental) 9.50 released

Welcome to Flightinfo.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends
  • Share the passion of aviation
  • Friendliest aviation community on the web

Neal

Forums Chief Pilot
Staff member
Joined
Oct 31, 1996
Posts
746
Type aircraft owned
Carbon Cub FX-3
Base airport
KFCI
Ratings
COMM, IFR, MEL, SEL

Changes made from version 9.41 to 9.50:​

  • Added support for GTR 205x and GTR 205 xR COM Radios over CAN
  • Improved Rotax 916iS support
  • Improved EIS and engine page layout
  • Improved 500 foot audio alert
  • Improved Traffic inset window
  • Improved GI 260 annunciation
  • General improvements to system operation
  • Includes update to GEA24(B) software version 4.01
  • Includes update to GI260 software version 3.00
  • Includes update to GTR20/200 software version 3.51
  • Includes GMA245 software version 3.20
  • Includes G5 software version 8.51
  • Includes GSU25/B/C/D software version 4.50
  • Includes GSU25/B boot block software version 2.30
  • Includes GSU25C/D boot block software version 2.10
  • Includes GMA245 audio software version 2.20
  • Includes GMA245 Bluetooth software version 2.00
  • Includes GMA245 boot block software version 2.40
  • Includes GEA24B boot block software version 2.00
  • Includes GEA24 boot block software version 2.20
  • Includes GHA 15 boot block software version 2.00
  • Includes GHA 15 software version 2.00
  • Includes G5 boot block software version 2.40
  • Includes GAD 27 -1X software version 2.00
  • Includes GAD 27 -1X boot block software version 2.00
  • Includes GAD27 boot block software version 2.30
  • Includes GAD27 software version 2.80
  • Includes GAD29 software version 3.40
  • Includes GAD29 boot block software version 3.10
  • Includes GAD29C boot block software version 2.00
  • Includes GAD29C software version 2.10
  • Includes GSU73 software version 3.80
  • Includes GSU73 IGRF database version 1.04 (Base Year 2020)
  • Includes GAD13 software version 2.10
  • Includes GAD13 boot block software version 2.00
  • Includes GDL39 software version 4.91
  • Includes GI260 boot block software version 2.20
  • Includes GMC507 software version 5.00
  • Includes GMC507 boot block software version 2.30
  • Includes GMU11 software version 2.20
  • Includes GMU11 boot block software version 2.10
  • Includes GPS20A software version 2.40
  • Includes GPS20A boot block software version 2.10
  • Includes GSA28 software version 5.70
  • Includes GSA28 boot block software version 2.20 or 2.10 (-2X Model)
  • Includes GTR20/200 boot block software version 2.40
  • Includes GDL5x software version 2.23
  • Includes Timezone database version 37.00
 
Just did the last update to 9.41, alerts and annunciations work if I highlight the Aux tab on the config page and it holds that setting. I think I'll coast and wait for fallout before I update again. Let me know what the 500 foot audio alert sounds like, curious how they would improve that.
 
In true Garmin fashion, the release is BAD and again poorly tested and hence we wait for one, two, or three more versions to get it right. As a software guy, I don't get it, why experimental releases appear to be untested releases. Anyways, I digress, but I went to install 9.50 today and my GTR 20 remote failed to update which puts it in an update loop. Fortunately it's discussed on the Van's Aircraft forum and @craig.roser armed me with the knowledge should it occur which is to pull all breakers except PFD and COM2. After doing that the GTR 20 updated.

 
Last edited:
Looks like an update is imminent:

 

Latest resources

Back
Top