Welcome to Flightinfo.com

  • Register now and join the discussion
  • Friendliest aviation Ccmmunity on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, promote aviation
  • Share the passion for aviation
  • Invite everyone to Flightinfo.com and let's have fun

Boeing and the 787

Welcome to Flightinfo.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends
  • Share the passion of aviation
  • Friendliest aviation community on the web
Dizel8 said:
Figured since we had a thread about Airbus, we needed a Boeing thread too:

Boeing is soaring on orders for its new 787--a plane assembled from across the world. That's part of the problem.

http://www.forbes.com/global/2006/0417/040.html?partner=yahoomag

Yeeeep! Boeings got a lot of problems....."Aging Gas Guzzling wide bodies." [ie. the 777 which out sold the A330-A340] and [The 737, the most successful commercial jet of all time] Whew! Boeing has problems...."Airbus has sworn off using composites for the pressurized parts of its A350 and A380. It poses too many risks"...[Nevermind Boeing has been working with composites before Airbus was born]. Oh my, what is Boeing going to do???....THE SKY IS FALLING! :laugh: :laugh: :laugh: :laugh: :laugh:
 
I agree the 777 is better than the 330 and the 350 is weak compared to the so far flightless 787 on paper. The big issue IMO for Boeing is going to be in the 737 size aircraft market. The 320 tends to be a better passenger experience airplane from what I read and see. If Airbus could create a follow on to the 320 that can steal market share from the 737NG's it might buy it sometime to tweak the 350 and 380 issues. Having the 380 hanging over Airbus's head must be a distraction for them to some extent. You have all the attention focused on getting the beast to the customer, the inevitable delays and customer issues associated with a new aircraft and if they are not ready for it they could let other projects slip.

Perhaps Airbus is suffering from target fixation with the A380. Boeing is adept at the changing market and may have a bit of an edge due to its longevity in the industry.
 
737 Replacement is already on the way...........

Boeing firms up 737 replacement studies by appointing team

Boeing has taken its first formal step towards launching a replacement for the 737, appointing key personnel to the internal study that has been downplayed for the past several years.

The Boeing 737 replacement study (737RS) has now been apointed a director in Mike Cave, current Boeing Commercial Airplanes' (BCA) vice president for aircraft programmes, the airframer confirmed this morning. Cave will lead the 737RS planning team, with a target date of 2012-2015 for a sucessor to the 737 Next Generation twin jet. Until today Boeing has kept 737 replacement elements of its "Project 20XX" studies (which also resulted in the Sonic Cruiser and 787 initial technology studies) under wraps.

As reported in Flight International's special report to mark the 5,000th 737 airframe rolling off the production line (Flight International 7-13 February), Boeing is understood to have advanced its 100-200 seat Yellowstone 1 (Y1) jet studies (a Flight International artist's impression of which is pictured below). Sharing a common research pool as the Y2, which became the 787, any new 737RS/Y1 will share technology with the long-range twin jet. Boeing is also likely to use the research at a later stage to develop its Y3 replacement of the 777.

In December last year, BCA chief executive Alan Mulally, said a replacement for the narrowbody would enter service between 2012 and 2015, which has now been accelerated in a bid to beat Airbus, which has its own New Short Range aircraft replacement studies for the rival narrowbody A320 family. According to sources, Boeing plans to start talking to suppliers by the middle of this year.

The RS/Y1 concept is likely to be based around an all-composite 787-like structure, fly-by-wire, more-electric system architecture, EVS-integrated avionics flightdeck, and a cabin cross-section “wider than A320”. Aerodynamic improvements include a wing of increased span, single-slotted flaps, raked and blended-winglet wingtip options, blended fin root and 787-like Section 41 (nose) and flightdeck.

Boeing has confirmed too that Carolyn Brandsema, director of engineering for the 737 multimission maritime aircraft will direct the production planning for the 737RS. Boeing has confirmed that other leaders of the team will include marketing vice-president Kent Fisher, who will assess market demand for a new aircraft, and finance director Rod Wheeler who will investigate cost issues. Programme management matters will be the responsibility of Don Moon.
 
Last edited:

Latest resources

Back
Top Bottom