Welcome to Flightinfo.com

  • Register now and join the discussion
  • Friendliest aviation Ccmmunity on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, promote aviation
  • Share the passion for aviation
  • Invite everyone to Flightinfo.com and let's have fun

Alert Garmin releases 9.33 for GX3 Touch (experimental)

Welcome to Flightinfo.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends
  • Share the passion of aviation
  • Friendliest aviation community on the web

Neal

Forums Chief Pilot
Staff member
Joined
Oct 31, 1996
Posts
710
Type aircraft owned
Carbon Cub FX-3
Base airport
KFCI
Ratings
COMM, IFR, MEL, SEL

I'll be waiting this one out as these updates are usually plagued with problems and go through cycles before stabilized. I also think post 9.31 may reveal surprises for us CubCrafters' peeps with the questioned intercom wiring. If you install this update please reply below with your findings, good or bad.

Changes made from version 9.31 to 9.33:​

  • General improvements to system operation
  • Includes update to G5 software version 8.44
  • Includes update to GDL5x software version 2.23
  • Includes update to GSA28 software version 5.70
  • Includes update to timezone database version 35.00
  • Includes G5 boot block software version 2.40
  • Includes GAD 27 -1X software version 2.00
  • Includes GAD 27 -1X boot block software version 2.00
  • Includes GAD27 boot block software version 2.30
  • Includes GAD27 software version 2.80
  • Includes GAD29 software version 3.40
  • Includes GAD29 boot block software version 3.10
  • Includes GAD29C boot block software version 2.00
  • Includes GAD29C software version 2.10
  • Includes GEA24B boot block software version 2.00
  • Includes GEA24B software version 2.10
  • Includes GEA24 software version 3.90
  • Includes GEA24 boot block software version 2.20
  • Includes GSU25/B boot block software version 2.30
  • Includes GSU25C/D boot block software version 2.10
  • Includes GSU25/B software version 4.40
  • Includes GSU25C/D software version 2.90
  • Includes GSU73 software version 3.80
  • Includes GSU73 IGRF database version 1.04 (Base Year 2020)
  • Includes GAD13 software version 2.10
  • Includes GAD13 boot block software version 2.00
  • Includes GDL39 software version 4.91
  • Includes GI260 software version 2.90
  • Includes GI260 boot block software version 2.20
  • Includes GMA245 audio software version 2.20
  • Includes GMA245 Bluetooth software version 2.00
  • Includes GMA245 software version 3.10
  • Includes GMA245 boot block software version 2.40
  • Includes GMC507 software version 5.00
  • Includes GMC507 boot block software version 2.30
  • Includes GMU11 software version 2.20
  • Includes GMU11 boot block software version 2.10
  • Includes GPS20A software version 2.40
  • Includes GPS20A boot block software version 2.10
  • Includes GSA28 boot block software version 2.20 or 2.10 (-2X Model)
  • Includes GTR20/200 software version 3.50
  • Includes GTR20/200 boot block software version 2.40
 
Garmin aka "g3xpert" participates on the Van's builders forum and it's usually good to watch that forum for G3X update info. They are the ones that found the bad release with 9.32 that came out first. Good to follow the discussion:

 

I'll be waiting this one out as these updates are usually plagued with problems and go through cycles before stabilized. I also think post 9.31 may reveal surprises for us CubCrafters' peeps with the questioned intercom wiring. If you install this update please reply below with your findings, good or bad.
I think I'll let someone else try this one first
 
I needed to spice up my life after my landing light saga so I decided to update to 9.33 today. My routine is insert the SD card, of course, but then power on everything: MASTER, AV, SERVOS so everything is powered up for the updates.

I got concerned as my Garmin G5 showed an error communicating with the AFCS (autopilot). The G5 then updated and the error remained. Then I got the software update status and everything appeared fine except for the pitch GSA 28 (autopilot servo). I waited and waited, the roll servo showed updated and nothing. I powered everything down then on again and now the pitch servo updated.

Everything checked good and I flew, no issues noted. Cheated Garmin death once again.

g3x-933-update-bottom.JPG
g3x-update-top.JPG
 
I updated to 9.33 today, and also came out unscathed.
 

Latest resources

Back
Top